Miller Multimatic 235 Multiprocess Welder w/ EZ-Latch™ Dual Cylinder Running Gear & TIG Kit – 240V
$ 91.00
- FeaturesWhat´s IncludedSpecificationsResourcesFeatures Miller Multimatic 235 Multiprocess Welder w/EZ-Latch™ Dual Cylinder Running Gear & TIG Kit Package 951847 The Miller Multimatic 235 with EZ-Latch™ dual cylinder running gear and TIG kit is a 235 amp, portable multi-process welder that is capable of MIG, Flux-cored, DC stick, DC Lift-Arc™ TIG and Pulsed TIG welding. It is the first-ever Miller welder that functions with any OPTIONAL Miller Spoolmatic or Spoolmate™ spool gun. For Spoolmate 200 and all Spoolmatic models, Auto-Gun Detect automatically detects which gun (MIG or Spool) is being used and allows you to switch between MIG gun and spool gun by simply pulling the trigger. Spoolmate 100 and Spoolmate 150 spool guns can also be used with the Multimatic 235, but the Auto-Gun Detect® feature will not work with these spool gun models. Both the Spoolmate 100 and 150 need to be plugged into the 235’s MIG gun receptacle in order to function properly. Spool Guns300497Miller Spoolmate 200Spool GunsMiller Spoolmate 200 0 out of 5 (0) Most economical and reliable spool gun in its class! Designed specifically for home hobbyists & light fabricators. Rated at 160 amps at 60% duty cycle – ideal for welding with .023 – .035 wires. Perfect for use with the Millermatic® 212 Auto-Set™. SKU: 300497 $1,733.00 Add to cart - The Multimatic 235 comes complete with full color 4.3 inch LCD screen with Auto-Set™ Elite technology. Auto-Set™ Elite sets MIG, Stick and DC TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. The 235 also features a built in program for stainless steel MIG welding that uses Argon 98%/CO2 2% as the shielding gas. This will save hundreds of dollars per cylinder over using helium mix shielding gases for your stainless steel MIG applications. EZ-Latch™ running gear with dual cylinder and elevated gun & cable rack gives unmatched portability to the Multimatic 235. For moving around the shop, your 235 welder attaches to the running gear through a series of four, quick-disconnect latches. For times when your 235 is taken into the field, the machine and running gear can be quickly separated for loading into a vehicle. The 235 can also be separated from the EZ-Latch running gear to access difficult-to-reach areas around the shop where a welder with full running gear/cylinder rack might not otherwise fit. The elevated gun and cable rack helps keep MIG guns, Spool Guns, TIG torches and cables out of the way for easier movement within the workspace. NOTE: EZ-Latch™ running gear comes in separate box and requires some assembly. Components assemble in four steps and include: cart with front caster wheels, dual cylinder tray with rear wheels, dual cylinder post and gun & cable rack. The Multimatic® 235 runs on 240V single-phase input power. It comes complete with TIG kit with 150 amp air-cooled TIG torch, MDX™-250 MIG gun, electrode holder, clamp, flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and material thickness gauge. Processes MIG (GMAW) Flux Cored (FCAW) DC Stick (SMAW) DC Lift-Arc™ TIG (GTAW) Pulsed TIG (GTAW-P) Versatility Multiprocess Capabilities of MIG, Stick, DC Lift Arc TIG and DC Pulsed TIG Easy-to-understand interface 4.3-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time Auto-Set™ Elite Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels. Portability – Machine only weighs 63 lb Weight is reduced by more than 50 percent compared to transformer welding machines TIG Kit Kits comes complete with everything needed to TIG weld with the Multimatic 235. Includes 25-foot (7.6 m) Weldcraft™ A-150 TIG torch, RFCS-14 HD foot control, 10-pin to 14-pin adapter cord, flow gauge regulator with 5-foot (1.5 m) gas hose, and AK3C torch accessory kit. EZ-Latch™ Dual Cylinder Rack with Elevated Gun and Cable Rack Quickly disconnects from the machine and enables portability. Dual cylinder rack and storage compartment. Allows operator to easily store two gas cylinders. Includes elevated gun and cable rack to keep cables off the floor and tangle free. Gun-On-Demand™ Millers Gun-On-Demand™ allows operators to simply pull the trigger on MIG gun or Spoolgun. Automatically detects and recalls the voltage, wire feed speed of the active gun. MDX-250 MIG Gun w/ AccuLock™ MDX consumables AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ MDX contact tips provide superior arc performance. Comes complete with Multimatic® 235 multi-process welder with 7 ft. (2.1 m) industrial power cord EZ-Latch™ dual cylinder running gear with elevated gun and cable rack accepts two up to “T” size (300 cubic foot) shielding gas cylinders Cylinder chains TIG Kit with RFCS-14HD remote foot control, 10-Pin to 14-Pin adapter cord, 25 ft. Weldcraft® 150-amp WP17 TIG torch with 50-mm Dinse connector, AK-2 torch accessory kit, regulator and gas hose. 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun with Bernard® AccuLock™ MDX consummables for .030/.035 in. (0.8/0.9 mm) wire 10 ft. (3 m) cable with electrode holder and 50 mm Dinse-style connector Flow gauge regulator and gas hose for argon or AR/CO2 mix .030/.035 in. (0.8/0.9 mm) reversible drive rolls Extra contact tips Material thickness gauge What´s Included Power source with 10 ft. (3 m) industrial power cord 15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/Bernard® AccuLock™ MDX consumables for .030/.035 in. (0.8/0.9 mm) wire 10 ft. (3 m) cable w/electrode holder & 50 mm Dinse-style connector 10 ft. (3 m) work cable w/clamp & 50 mm Dinse-style connector 2 Flow gauge regulator and gas hose for argon or AR/CO2 mix .030/.035 in. (0.8/0.9 mm) reversible drive rolls Extra contact tips Material thickness gauge EZ-Latch™ dual cylinder running gear with elevated gun and cable rack Multimatic 235/255 TIG kit Two chains to secure gas cylinders Specifications PROCESSES Flux Cored (FCAW) MIG (GMAW) Pulsed TIG (GTAW-P) Stick (SMAW) TIG DC (GTAW-DC) Aluminum Welding GENERAL SPECIFICATIONS Title Multimatic® 235 Multiprocess Welder w/ EZ-Latch™ Dual Cylinder Running Gear & TIG Kit – 240V Weldable Metals Steel Stainless Steel Aluminum Input Voltage 220/230/240 V 208 V Input Phase 1-Phase Input Hz 50 / 60 Hz Current Type DC Max Open Circuit Voltage 54 VDC Portability Handle(s) Running Gear / Cart (Standard) Weld Output CC / CV Warranty 3 Years Miller’s True Blue Warranty Resources Multimatic 235 Q&A SellSheet 288656 SKU: 951847 Categories: Brands, Miller Electric, Multiprocess Welding Brand: Miller
Cougar Exclusive Loop Band
